I left the frames "core" laminate to dry overnight in the garage. Unfortunately it was freezing overnight so it failed to go off. I brought it in from the cold and put it on the dining room radiator. I also noticed that one section wasn't glued up so I injected some between the sheets and reclamped that bit.
This was left for around 6 hours on the radiator. When I came back it was all set (and toasty warm). IT was stiff enough for a 12mm lamination but not quite as stiff as I hoped. Still there is another 8mm of wood to go onto it.
So, just the lightning holes and final exterior sections to go on!
No comments:
Post a Comment